Liquid Cooling Check Valve Product Working Principle And Features Application

Check Valve cooling is an automatic, corrosion-resistant valve that automatically opens and closes its disc based on the flow of the medium to prevent reverse flow. It is also known as a cooling Check Valve. The cooling water Check Valve is suitable for horizontal installation; the Check Valve data center are suitable for vertical installation; and the cooling Check Valve can be installed in either vertical or horizontal directions.

Operating Principle:

1. cooling water Check Valve only allow flow in one direction and prevent reverse flow. Check Valve cooling typically operate automatically. The disc opens under pressure from flow in one direction. When the fluid flows in the reverse direction, the fluid pressure and the weight of the disc close the disc, acting against the valve weight, thereby shutting off flow.

Product Features:

1. water cooling Check Valve are automatic valves that rely on the flow of the medium to automatically open and close the disc, preventing reverse flow.

2. Fluorine-lined valve connection standards: This product can be manufactured and supplied according to user requirements in accordance with ANSI (American Standard), DIN (German Standard), JIS (Japanese Standard), and other standards.

Technical Specifications:

1. Design and Manufacturing Standard: GB/T 12235-2007.

2. Structural Length Standard: GB/T 12221-2005.

3. Connection Flange Standard: GB/T 9113.

4. Pressure and Temperature Rating: GB/T 12224-2005.

5. Testing and Inspection Standard: GB/T 13927-2008.