How To Choose Liquid Cooling Check Valve?
The selection criteria of water cooling Check Valve are as follows: 1. For medium and high pressure check valves with nominal diameters between DN50mm and DN600mm, swing check valves should be used. 2 ...
What Standards Should Be Followed In Designing Liquid Cooling Ball Valve?
The implementation standards of design cooling Ball Valve are as follows: 1. API 6D "Pipeline Valves"; 2. API 598 "Inspection and Testing of Valves"; 3. JB/T 6899 "Fire Resistance Test of Valves"; 4. ...
Definition Of Quick-install Pneumatic Liquid Cooling Butterfly Valve
The definition of cooling Butterfly Valve is as follows: The quick-install pneumatic cooling water Butterfly Valve is made of 304, TP316L and other sanitary food-grade stainless steel materials, and u ...
What Are The Technical Parameters Of Liquid Cooling Valve?
The technical parameters of Valve data center are as follows: 1. Product material: 304, 304L, 316, 316L; 2. Applicable media: water, oil, gas and some corrosive liquids; 3. Industrial standards: DIN, ...
What Is The Difference Between Liquid Cooling Valve And Industrial Valves?
The differences between cooling Valve and industrial valves are as follows: The material of cooling water Valve is usually 304SS or 316 stainless steel, and the products will undergo some special trea ...
What Types Of Liquid Cooling Valve Are There?
According to the size of the nominal pressure, water cooling Valve can be divided into: 1. Vacuum valve: refers to a cooling water Valve with a working pressure lower than the standard atmospheric pre ...
Selection Of Liquid Cooling Valve
The selection method of cooling water Valve is as follows: 1. When the pipelines of food, beverages and biopharmaceuticals need to observe the flow and flow of the medium in the pipeline at any time, ...
Installation Of Liquid Cooling Valve Gasket
The installation method of cooling Valve gasket is as follows: Before installing the valve gasket, apply a layer of graphite powder or molybdenum disulfide powder on the sealing surface, gasket, threa ...
What Types Of Liquid Cooling Check Valve Are There?
Check Valve cooling has the following types: 1. Pipe check valve: a valve whose disc slides along the center line of the valve body. 2. Compression check valve: This valve is used as a valve for boile ...
Certification Standards For Liquid Cooling Valve
The certification standards of cooling water Valve are as follows: Valve cooling are a special type of valve. The difference between them and ordinary valves is that they are used in different environ ...
What Are The Inspection Standards For Liquid Cooling Ball Valve?
The inspection standards for cooling water Ball Valve are as follows: 1. API 6D "Pipeline Valves" 2. API 598 "Inspection and Testing of Valves" 3. JB/T 6899 "Fire Resistance Test of Valves" 4. API 6FA ...
How To Install Liquid Cooling Ball Valve Better?
The installation steps of Ball Valve data center are as follows: 1. First, you need to remove the protective covers on both sides of the flange end, and then flush and clean the valve body of the cool ...