What Are The Precautions For Installing And Liquid Cooling Ball Valve?
water cooling Ball Valve is composed of two flanges, a valve body and two PTFE valve seats. It is installed with bolts. A valve seat cleaning joint can be added to clean the ball valve cavity and discharge it from the drain hole. So do you know what are the precautions for installing Ball Valve cooling?
The precautions for installing cooling Ball Valve are as follows:
1. Before installing the Ball Valve data center, make sure that the cooling Ball Valve meets the design requirements and relevant standards.
2. When transporting and installing the cooling water Ball Valve, be careful to prevent accidents of bumps and scratches
3. Before installing the Ball Valve cooling, remove impurities such as iron filings to prevent foreign matter from being mixed in the sealing seat of the water cooling Ball Valve. In addition, the cooling Ball Valve should be closed during installation.
4. When lifting the valve. The water cooling Ball Valve should be lifted correctly at the designated lifting position so that the cooling water Ball Valve can be lifted or pulled only under local force.
5. When installing the Ball Valve cooling system, make sure whether the medium flow direction, installation form and handwheel position meet the regulations.
water cooling Ball Valve are valve fittings used in places with high hygiene requirements. So do you know what tools and precautions are there for disassembling Ball Valve cooling?
Tools and precautions that should be used to disassemble cooling Ball Valve. When disassembling Ball Valve data center: pay attention to the valve seat, do not scratch it with hard objects, otherwise the seal will not be tight; and the ball valve should not be placed randomly, it is easy to lose. The tools for disassembling and assembling cooling Ball Valve include screwdriver wire cutters, adjustable wrenches and hammers.
cooling water Ball Valve also have the following tools: locking wrench: locking wrench, divided into fixed hook wrench, movable hook wrench and U-shaped locking wrench; fixed wrench: wrench a nut of a specification, the wrench is not easy to damage the nut and bolt compared with the adjustable wrench; Ball Valve cooling socket wrench: composed of plum wrenches of different sizes, used for difficult-to-operate positions; water cooling Ball Valve handwheel wrench: can be welded with the following pipes and round steel, commonly used switch handwheel.
