What Are The Key Points For Operating The Data Center Liquid Cooling Valve?

Key operating points for valves water cooling Valve include the following:

cooling water Valve Before operation, check that the piping system pressure is within a safe range and ensure that the valve nameplate information is legible and the valve is in good sealing condition. When opening the valve, first confirm that the valve is in the closed position. Use the electric actuator or manual control to rotate the valve slowly (usually between 0° and 90°). Avoid sudden full opening or rapid opening and closing to minimize impact on the sealing surface. Valve cooling system During operation, it is strictly forbidden to use tools to forcibly actuate the valve. Only light force is required for opening and closing. Excessive force may deform the valve stem or cause seal failure.

If manual operation is required (e.g., during a power outage), switch to manual mode and rotate the handwheel in the "counterclockwise for open, clockwise for close" direction. The opening can be confirmed by the pointer or position indicator (0° for closed, 90° for open). In an emergency, a dedicated device can be used to quickly close the valve. Operators should be familiar with its location and operation in advance. Regularly check the valve stem lubrication, sealing surface wear, and actuator electrical connections to ensure valve flexibility and reliability.

water cooling Valve maintenance requires power off. Regularly clean the valve body and exterior. Test full open and close functionality quarterly. Annual maintenance requires disassembly, inspection, and replacement of worn seals. Ensure correct installation orientation to avoid reverse rotation, which may affect sealing performance.