Liquid Cooling Check Valve Product Main Features And Applications

cooling water Check Valve is suitable for installation in vertical pipelines and is suitable for use with aqua regia, sulfuric acid, hydrochloric acid, chlorinated hydrochloric acid, various organic acids, strong acids, and strong oxidizers at temperatures between -50°C and +150°C. FEP is also suitable for use in pipelines carrying various concentrations of strong alkalis, organic solvents, and other corrosive gases and liquids.

Main Features:

1. The Check Valve cooling is an automatic, water cooling Check Valve that automatically opens and closes the disc based on the flow of the medium to prevent reverse flow. It is also known as a cooling Check Valve.

2. The inner surface of the water cooling Check Valve body is coated with a variety of fluoroplastics, offering high strength and excellent corrosion resistance.

3. Suitable for various operating temperatures and fluid pipelines, it provides one-way opening and closing to prevent backflow of media in various pipelines or equipment.

Operating Principle:

1. cooling water Check Valve is a valve that automatically prevents fluid backflow.

2. The Check Valve cooling system disc opens under fluid pressure, allowing fluid to flow from the inlet to the outlet.

3. When the inlet pressure is lower than the outlet pressure, the disc automatically closes due to factors such as the fluid pressure differential and gravity, preventing backflow.

4.water cooling Check Valve should be installed vertically in the pipeline. During installation, ensure that the direction of media flow is consistent with the direction of the arrow marked on the Check Valve cooling body.

Technical Standards:

1. Design Standard: Conforms to enterprise standards.

2. Structural Length: GB1 2221.

3. Flange Standard: JB/Y79-94 GB91131-26.

4. Nominal pressure: 10, 16, 2.5 MPa.

5. Inspection and testing: JB/Y9092-99.