How To Install And Test Liquid Cooling Butterfly Valve?

The installation, inspection and use methods of Butterfly Valve cooling are as follows:
1. It is recommended to install a special matching flange for the butterfly plate.
2. The water cooling Butterfly Valve can use a turbine box for flow regulation.
3. The cooling Butterfly Valve cannot be installed upside down on the pipeline, and should be placed upright on the pipeline as much as possible.
4. The use effect of the water cooling Butterfly Valve needs to be tested regularly, and any faults need to be handled in time.
5. Before installation, the inner cavity of the cooling water Butterfly Valve needs to be cleaned, and the butterfly plate cannot be closed before cleaning to prevent damage to the sealing ring.
6. The Butterfly Valve cooling system needs to be checked to see if each part is connected and tightened to ensure that there is no risk of packing leakage, and check whether the valve stem can rotate flexibly.