What Are The Factors That Affect The Service Life Of Liquid Cooling Valve?

cooling Valve is a stop valve that uses a diaphragm as a start and close member to close the flow channel, cut off the fluid, and separate the inner cavity of the valve body from the inner cavity of the valve cover. cooling water Valve are often made of elastic, corrosion-resistant, and non-permeable materials such as rubber and plastic. So do you know what factors affect the service life of sanitary diaphragm valves?

The factors that affect the service life of Valve cooling are introduced as follows:
1. Method to extend the service life of water cooling Valve by working at a large opening
Let the cooling Valve work at a large opening as much as possible from the beginning, such as 90%. In this way, cavitation, erosion and other damage occur on the head of the valve core. As the valve core is damaged, the flow increases, and the corresponding valve is closed a little more. In this way, it is continuously damaged and gradually closed, so that the entire valve core is fully utilized until the valve core root and sealing surface are damaged.

2. Method of increasing the working opening of water cooling Valve to improve service life

The cooling water Valve increases the loss of the system except the Valve cooling system, which reduces the pressure drop allocated to the valve. In order to ensure the flow through the water cooling Valve, the opening of the Valve cooling must be increased. At the same time, the pressure drop on the valve is reduced, which also weakens cavitation and erosion.